Cyberbond RH 99

RH 99

Cyberbond RH 99 Retainer - Cylindrical Parts

High Strength, High viscosity Anaerobic adhesive.

For dynamic loaded parts.

CB RH 99 Technical Data

Colour - Green

Viscosity - 1.600 - 2.200 tx (mPa*s)

Setting Time - 20 - 40 (min)

Shear Strength - 22 - 38 (N/mm2)

Gap Filing Capacity:

Max Thread - R 3"

Gap (mm) - 0,10 - 0,25

Temperature Range - ( - 50 / + 150 )

General Description

Threads, shafts and bearings are to be retained durably and reliably. Generally the need to dismantle these joints easily is not required. Therefore, the high strength retainers of the Cyberbond “R” series grades meet the requirements of these types of joints. When Cyberbond is used a uniform stress distribution throughout the joint is achieved, which means dynamical and statical loads can easily be withstood. In contrast to the benefits of these modern liquid retainers, traditional cylindrical assembly methods do have the following disadvantages:

-       in the case of press fits or shrink fits high machinery costs are involved and the parts have to be designed very accurately and become very expensive joints,

-       in common drive assemblies pins, splices or adjusting springs are often used which have the disadvantage of fretting corrosion and high punctual stress,

-       due to various elongation figures in different metals a welding or soldering process is quite often limited or even impossible.

When Cyberbond retainers are selected all these disadvantages disappear. By means of a room temperature cured Anaerobic Adhesive, higher strength values can be achieved compared to assembly method like e.g. a press-fit where no adhesive is used. When Cyberbond retainers are used the following advantages are gained:

-       small gaps can be bridged, which allows less costly designed mating parts,

-       friction corrosion is avoided,

-       different elongation figures of mating parts can be balanced.

Click on the link below to go straight to our shop.

logo for bottom of page